2-Wire Temperature Transmitter for RTDs or Thermocouples
Conax Model: HPTI
The Conax Model HPTI is a small, isolated, 2-wire temperature transmitter for RTD or thermocouple sensors, and is designed to fit in our popular T11 model terminal head.
The HPTI housing has a removable base allowing access to the electronics for the purpose of temperature range changes, which are easily accomplished with plug-in resistors.
|
Isolation (I/O) |
1000VDC or peak AC |
Output SPAN |
4-20mA, limiting @ <28mA |
Input |
RTD - 100§Ù, 2 or 3 wire connection TC - all known types |
Input SPAN |
SRTD: 20¨¬C min., 500¨¬C max. T/C: 5mV min. SPAN |
Adjustability |
¡¾15% for both ZERO and SPAN |
Burnout Detection |
Upscale, Standard |
Supply Voltage |
8-38 VDC polarity protected |
Maximum Load |
Rmax = (V supply - 8V)¡À 20 mA |
Ambient Temp. |
-20¨¬C to +70¨¬C |
Humidity |
0-95% RH, non-condensing |
Linearity |
RTD: Better than ¡¾ 0.1% of SPAN referred to sensor temperature TC: Better than ¡¾0.1% of SPAN referred to mV input level |
Stability (for both ZERO and SPAN) |
RTD (100¨¬C SPAN): .03% of SPAN/¨¬C T/C: (25mV SPAN): 0.02% of SPAN/¨¬C |
Reference Junction Compensation |
T/C: <0.05¨¬C/¨¬C of ambient temp. |
Accuracy |
0.1% of SPAN (+ 0.5¨¬C, T/C only) typical |